Hopefully this is not too long! There has been a lot of changes since the last time I posted a full overview like this
This guy selfhosts.
Me: hey, I own that exact Anker USB power supply. I’m basically as pro as this guy!
Narrator: his old laptop and external hard drive set-up was not as impressive, even with the Anker USB power supply.
Funny you think I’m pro, I just like blinky lights!
Some people harness that desire into Christmas displays.
You made a mini-internet, complete with mini-mini-intenets!
Wow, you must be rich
I think the reason we aren’t rich is because we do shit like this.
Anyway, I’m off to buy enough HDDs to get me through the end of the month.
Honestly its all cheaper than you think, 100% of it I bought used bar a few things, and over a long amount of time too. Plus messing with stuff like this has 100% helped me advance my career
it’s this or plastic surgery
I’m too ugly for plastic surgery
No way that’s true: possums are known for the natural majesty!
“What would you do if you won the lottery?”
Me: points to this blog post.
You’ll be surprised how cheap some equipment goes for when a company runs out of business. Just sayin
Feeling of inadequacy rising…
You must throw sick LAN parties…
I love the fact that you have a favourite switch!
Honestly I’d love to throw a LAN party
I’m horrible at CS:GO but I’ll cheer you on
I’m not bad, but I suspect I’m worse than a lot of guys out there
Can I come?
If you bring the beer
Wow. That’s really an overkill.
Any idea what’s the power consumption of all that hardware?
How many hours a month do you spend upgrading or maintaining the network and all other software?
Also wanna know
Honestly, I’m not 100% sure. I don’t have a way to monitor just the stuff in the rack as the UPS also powers a lot of other stuff in the house. Either way, I’ve worked to make everything fairly low power, or at least as low power as feasible. The things that use the most power is the disks
I can tell you its less than 800w though, as that’s the lowest the UPS goes at night. But that also does include both me and my wifes desktops which stay on 24/7, and an Apple TV, and standby power for all devices etc
Question. I have a home network that’s more advanced than your typical house. I started holding back though as I figured when I die my family won’t have a clue about all the stuff I have setup. Do you guys ever think about this? I’d hate to leave behind a nightmare for my family members to remove and replace with a regular ISP provided router.
Be single. Problem solved.
I’ve thought about that a lot. I don’t know whether to try to type up a manual of how everything works or just leave instructions on how to revert to a more basic setup. Either way I think my family would struggle.
Hahaha true for me too that they would struggle
I’ve thought about it, and nobody will care about your/my elaborate setup after we are gone. It will just be replaced by a ISP router without regrets.
Also thought about that a lot. The most important is that your people can access your data. My partner and bestie both have LUKS keys on all of my devices.
Maybe do a test run with them to see if they can actually access it.
Got it, sharing the password to my obscure furry midget porn collection with my people
My opinion is that your spouse will have to get rid of any other hobby related stuff. If you’re a fisherman, she’s going to have to find something to do with all the tackle, boat/s, gear.
I know a guy that was a woodworker who had a shop full of well over $20k worth of tools. Poor guy got cancer and died, and his wife had to try to get rid of all of it. Luckily she had some of his woodworking friends who helped her price and sell the stuff. (I got a pretty nice used planer out of the deal)
I have Bitwarden set to give my wife access if she requests it and I don’t respond in X days
Things generally “just work” so she would have access to everything, and she can figure out what she wants to do. All the passwords are there and all of the configs are fairly easy for stuff she cares about anyway
It is beyond me that you dont get symetrical connection with fiber in the US.
I am in the US and I do… In fact, I can upgrade to symmetrical 5Gb now with AT&T
What does your current connection cost per month? I get my 500/100 fiber next month for 59€/month. 1000/200 would be 79€, and that would be the fastest you can get :-/
$70/mo for the AT&T Fiber, and $50/mo for the Verizon 5G
200 up isn’t too bad, nothing to really cry over. My old connection at my last place was 1000/30! What a joke
I’m in Colorado and pay $49.95 for 1000/1000 (though i’m grandfathered in and i think it’s $69.95 for new users). There’s another ISP that offers the same at $70, or i can get 1200/35 cable for about $60.
I can get 2500/2500 for $149 and 10000/10000 for $249 (from my municipal provider) or I can get 6000/6000 for $300 (from the cable provider).
Australian here, I get 1000 / 50… don’t ask what it costs to upgrade that upload speed.
Can I ask why you pay for that speed? I’m on 25/10 and I’ve never felt it was the 25mb download cap that is holding me back.
I was pretty happy with 100/40 but I have 8 TV’s often all streaming 4k hdr from various services at once, along with my constant downloads so i had fiber installed and went to 1000, I’m pretty happy now.
I also sync ser ers between home and work so not having to severely throttle that is nice, upstream bandwidth is still awful though.
ahh thats fair, there’s never really more than one stream at a time here.
Removed by mod
Great job on the cabling and the setup! As an Apartment dweller, I hope you don’t mind my living vicariously through your setup!
I’ve been there! Such a hassle. It was great when I moved and was finally able to do what I wanted
I work in a school and I think you have more stuff than we do lol.
I don’t know if I should be happy or sad
Proud.
You said complete details… So where’s your private ssh key and public IP address?
Cool setup btw. Would love to get my hands on such a system.
Best I can do is my public key on the contact page!
Acronyms, initialisms, abbreviations, contractions, and other phrases which expand to something larger, that I’ve seen in this thread:
Fewer Letters More Letters DNS Domain Name Service/System ESXi VMWare virtual machine hypervisor HTTP Hypertext Transfer Protocol, the Web HTTPS HTTP over SSL IP Internet Protocol NAS Network-Attached Storage NVMe Non-Volatile Memory Express interface for mass storage PiHole Network-wide ad-blocker (DNS sinkhole) SSL Secure Sockets Layer, for transparent encryption VPN Virtual Private Network Jargon Definition Raptor Methane-fueled rocket engine under development by SpaceX
9 acronyms in this thread; the most compressed thread commented on today has 10 acronyms.
[Thread #21 for this sub, first seen 11th Aug 2023, 00:35] [FAQ] [Full list] [Contact] [Source code]
Who mentioned Raptor?..
Yeah but can it host PiHole?
It sure can, but so far I’ve not found much use for it. I set it up to see if it can block YouTube ads in the mobile app, but it can’t. Since I already use uBlock Origin, I don’t know what I gain
At least from my experience, with a proper blacklist it shuts down a ton more stuff. Not just pure ads, but a ton of tracking and websites/apps phoning home too. You can configure it to be as strict or lenient as you’d like, basically. For me it’s nice, because I can just apply it to the entire network, and I don’t have to worry about trying to explain how this works to my family
Maybe I’ll give it a go again, after all it does have a really nice slick WebUI
Also has the benefit of being a completely local DNS server for all your devices to use. I think you are also able to add custom entries if you wanted to be able to refer to your devices using dns. It also has some caching benefits so there are less DNS requests going out of your home network.
Personally I set up AdGuard Home because it has DNS over HTTPS support out of the box, which means your ISP cannot see your DNS requests. Pihole supports this too, but it requires additional setup.
Check out the Star Trek theme for PiHole! It’s one of the default options.
Solid writeup. Good looking setup. I like how you have a great reason for every decision you made.
Crazy overkill for almost everyone, but you’re living in the future!
Thanks!
Hi OP. If you’re reading this, I have a few questions:
- You’re using the Linode box as the server, on which you forward ports for your services. Am I to assume that you somehow access your homelab via your VPN using the Linode box too? Usually people would access their lab at home directly.
- Wouldn’t a whitebox build for your NAS save power?
- What are you using both switches for? Are you running out of ports?
- Since you’re running VMWare, are you running VMs for every service? Why not containers?
- Even if most of the content on your blog is static, how are you hosting it for it to load so quickly? Are you using some sort of CDN in front of your Linode box to cache the static assets like pictures?
It was great reading about your lab. I’ll try and follow your blog on RSS if you have a feed. Thanks.
- You’re using the Linode box as the server, on which you forward ports for your services. Am I to assume that you somehow access your homelab via your VPN using the Linode box too? Usually people would access their lab at home directly.
Yes, I also access the lab via the Linode box. I do however have direct VPN access too. The reason for using the Linode box is that for some reason, the speed and latency via the Linode box is far better that directly in. I can only assume its some kind of peering thing. I always connect in via my phone on T-Mobile, so perhaps the connection between T-Mobile and Linode, and the connection between AT&T and Linode, is better than T-Mobile to AT&T Residential? Unsure, all I know is that it works 100x better. And it also means I don’t need 2 different connections for the primary and secondary WAN, I can just connected to Linode and it will connect over whatever connection is active
- Wouldn’t a whitebox build for your NAS save power?
This really is a whitebox build, it uses very little power. The disks use the most amount of power, which there is no getting around
- What are you using both switches for? Are you running out of ports?
The 1Gb switches? yes, I ran out of ports on the Dell, or am very, very close
- Since you’re running VMWare, are you running VMs for every service? Why not containers?
Everything that can run in containers already is, on Debian VM’s within ESXi
- Even if most of the content on your blog is static, how are you hosting it for it to load so quickly? Are you using some sort of CDN in front of your Linode box to cache the static assets like pictures?
I am using CloudFlare in front of it, so that’s probably why. But even directly its pretty quick. I guess NVMe storage and decent internet means its fast?
Thanks!
How do you relay your VPN connection over your Linode box? I can understand a direct VPN connection, but I can’t understand the networking behind relaying the VPN connection around the Linode box.
Ah, yes CloudFlare is a great proxy/CDN. Thanks
Not OP, but also curious about number 5, I noticed that blog article loaded lickety-split!
Good to hear! I replied above about it, here was my reply
I am using CloudFlare in front of it, so that’s probably why. But even directly its pretty quick. I guess NVMe storage and decent internet means its fast?
Gah, treasure trove of info. Thank you for sharing! How’s the garage rack holding up? I’m so tempted to put some servers in my garage but the heat can get excessive.
Zero problems, often times stuff in the house is actually hotter than stuff in the garage funnily enough, even in summer
