The majority of my homelab consists of two servers: A Proxmox hypervisor and a TrueNAS file server. The bulk of my LAN traffic is between these two servers. At the moment, both servers are on my “main” VLAN. I have separate VLANs for guests and IoT devices, but everything else lives on VLAN2.

I have been considering the idea of creating another VLAN for storage, but I’m debating if there is any benefit to this. My NAS still needs to be accessible to non-VLAN-aware devices (my desktop PC, for instance), so from a security standpoint, there’s not much benefit; it wouldn’t be isolated. Both servers have a 10Gb DAC back to the switch, so bandwidth isn’t really a factor; even if it was, my switch is still only going to switch packets between the two servers; it’s not like it’s flooding the rest of my network.

Having a VLAN for storage seems like it’s the “best practice,” but since both servers still need to be accessible outside the VLAN, the only benefit I can see is limiting broadcast traffic, and as far as I know (correct me if I’m wrong), SMB/NFS/iSCSI are all unicast.

  • AlternateRoute@lemmy.caEnglish
    4·
    9 months ago
    • If having dedicated interfaces / subnets is needed for improved bandwidth
    • If you want to have a network segment with jumbo frames (you often don’t want this on the general network interfaces)
    • If the network protocol creates substantial network noise iSCSI / block level protocols tend to be very noisy. Vs file level ones like SMB or NFS
    • corroded@lemmy.worldOP
      1·
      9 months ago

      I do use iSCSI between my Proxmox server any my TrueNAS server. What do you mean by “noise,” exactly? My understanding is that because iSCSI isn’t broadcasting, my switch is only going to transfer packets between the two servers, which would prevent any “noise” from making it out to other devices on other ports.

      • AlternateRoute@lemmy.caEnglish
        2·
        9 months ago

        iSCSI is block level storage where NFS/SMB are file level… When you browse a folder with SMB/NFS it is going to ask the remote service for the meta file list then cache the whole thing till it thinks it needs it refreshed… iSCSI is going to go read a set of blocks to read the metadata off the remote file system. iSCSI can be considerably more chatty between the two hosts as it is lower level.