Stuff like this really makes me want to switch to jellyfin, but I watch stuff from me and my friend groups libraries and Plex lets me search for shows across my entire friend group at once. I’m afraid I’ll be waiting forever for jellyfin to allow federating servers so that [email protected] can share a library with [email protected] allowing Alice to browse red+blue instance content from their home instance UI instead of requiring an account with every instance.
Sure, most of them are posted here: https://www.printables.com/@StephenSmith
I almost exclusively print functional things so here’s my list of things I’ve designed or printed:
Some of this could have been bought online but having a 3D printer really reveals how overpriced plastic stuff is. I rarely print something that costs me more than a few dollars in filament - and that’s if it’s a very large object, it’s easily less than the shipping cost of an equivalent item alone, and small things can often only be found in large packs online while usually costing only a couple cents to print. And plenty of the stuff I print benefits from being able to be made custom and to the exact dimensions I need, for example the furniture leg extensions I made fit perfectly on the furniture legs and raise them up exactly as high as they need to be for my robovac to go under, not a centimeter more. A whiteboard marker caddy I made holds the exact number of markers I have / want to have and attaches under a light switch wall plate which I designed in order to avoid needing to attach it with command strips or screws (it gets clamped between the wall plate and the wall by the existing light switch screws). The first item I listed, the tubular key, was printed with the exact bitting needed for the lock (layer height of 0.05mm is enough vertical resolution for the key to work).
Was also gonna say this since expensive gadgets weren’t excluded. I played a bunch of VR minigolf over pandemic to socialize with my irl friends who I couldn’t hang out with and these days VR has been the center of more than half of the social gatherings at my place where I demo games and we pass the headset around for everyone to try different stuff. Seeing new people try VR for the first time never gets old.
The ribs are the simplest, at its most basic all you have to do is remove the membrane on the back and then curl it up on a trivet over a cup of water, pressure cook high for 25 minutes and let sit under pressure for 10-25 more minutes after it’s done (depending on how fall-off-the-bone you want, I usually like 25mins), glaze with bbq sauce and broil in the oven until it gets a bit of char.
You can also salt & pepper it before putting it in, use apple cider vinegar instead of water, and/or add a few drops of liquid smoke in the instant pot. But it turns out great even when I forget to do those things so really all you need is ribs and sauce.
I got the recipe from here: https://www.pressurecookrecipes.com/easy-bbq-instant-pot-ribs/
Here’s my favorite recipes, I use it every week:
Ribs - easy to get super consistent results, pressure cooking helps keep moisture in.
Clam chowder - creamy New England style, I add a lot of different seasonings to amp it up. The clams I get in cans and bottled clam juice so the only non-shelf-stable ingredients are onions, carrots, celery, and garlic
Spaghetti carbonara - my new cook book addition. grating the cheese adds more work, but overall still very simple as far as instant pot recipes go - saute the pancetta and reserve, saute onion and garlic, pressure cook pasta in broth, stir in butter, cream, cheese, egg, and pancetta when done
Corn chowder - really similar to the clam chowder but good for if you’re not feeling seafood, like most of the recipes I favorite, the steps mostly amount to dumping all the ingredients in, pressure cooking, and stirring in something extra at the end (in this case cornstarch and half&half to thicken)
I also use the instant pot some for other recipes but I lean heavily towards 1 pot meals and stuff where I can get away with putting 90% of the ingredients in for the pressure cooking step, that does mean a lot of soups but I’m working on adding more pasta dishes to my repertoire.
That’s because a robovac enables you to clean super frequently. The marginal cost of vacuuming and mopping with a robovac is 0, so there’s not much reason not to schedule it to run every day (or night if your model is quiet enough) so you can have spotless floors every day. I set mine to run vacuum and mop at 5am every day so I can wake up to freshly mopped floors. There’s no way I would ever want to put in the required amount of daily cleaning to achieve that if I didn’t have a robovac. The dock empties the bin, washes the mop, and refills the water tank through the laundry room water spigot as well as pumps the dirty mopping water out the washing machine drain tube in the wall so it’s fully automated and I only need to rinse the water filter every couple of weeks and change the docks vacuum bag every 6ish months.
If you don’t have any desire to have floors cleaned daily or to automate that then it makes perfect sense to just do a weekly cleaning like you do, but if you want to have 10 hours of cleaning done weekly then a robovac/mop is great for that.
I pay for refrigeration destruction, but that’s about it. It’s strongly verifiable, additional, and as permanent as can be. It’s through wren, which seems to be the most strict about credit quality since they removed all the other projects like cooking stoves and tree planting a while back leaving only refrigeration destruction and biochar, which also seems like a quality credit albeit many times more expensive than refrigeration destruction.
That said I don’t treat carbon credits as offsets, just an additional charity that I do on top of doing my best to be sustainable, reducing, reusing / repairing, and responsibly disposing of things. At the end of the day you can only do so much individually so the only way to do more is to put some of your extra money somewhere that might do a little extra good.
It’s worth noting that if you use privacy for free trials, they limit you to 3 cards linked to the same “merchant” (detected by the first transaction that goes through). After 3 cards you have to contact support to reset the limit for that merchant, so the single transaction cards are only good if you never want to shop there again because they immediately burn 1 use out of the limit.
A dht crawler is inherently an intensive service to run, magnetico used sqlite and would take 10 minutes just to load the splash page that includes the total count of discovered torrents.
Roborock or robovac, would be nice to keep up to date on new products and share troubleshooting info with other robovac owners / shoppers, but building that community here isn’t a task I’m up to.
A YouTube video by Rollie Williams, mind you - Holder of a masters degree in climate science and policy from Colombia University.
Lately it’s been Sailorsaturdays by Kokonoko https://youtu.be/YfnUim6no3A
I run both similarity on the same box with the same source library but still prefer Plex for many reasons. One is that the nicer findroid app doesn’t seem to support Chromecast, which is how I watch all media 99% of the time. Also the JF UI is a bit rough between laggy menu interactions and views sometimes having transparent backgrounds causing you to see the previous view underneath while transitioning between screens. I also don’t like that the continue watching in the default UI uses landscape cards for each title that take up way too much space, and neither the default app or findroid has a recommended tab for individual library folders (like how in Plex I can go to movies and see recently released, added, top in genre x, top by director y). I think that would really draw me to use JF more. As it is it feels like I just have to resort to browsing the alphabetical list which I hate doing with thousands of library items.
That makes sense considering that before this update, posts weren’t searchable so you could only find user profiles, hashtags, and your own (& favorited?) posts. It was basically just a hashtag and user search before.
I can’t help with the 2 options you presented, but if you’re interested in an sfp+ router, I’ve used the DEC2750/DEC750 from OPNsense as a directly fiber connected router for Comcast Gigabit Pro 2Gig fiber for several years. It’s super capable, you’ll have an enormous state table to accommodate tons of P2P connections for torrenting, and you’ll be able to enable loads of plugins, VPN connections, IDS, etc without the CPU breaking a sweat.
A major reason for me is manifest v3 and other shenanigans designed to neuter ad blockers. Secondary to that is promoting web renderer diversity - as a web dev I don’t want to go back to the days where we could only afford to cater to one engine - chromium / blink in this case.
Yeah so you’re essentially holding your breath while you do it, so you’d need to take a break to breathe in and if you’re trying to siphon you would need to seal your lips to prevent losing your progress / prevent the liquid from falling back down. But you can exhale while doing it, which also helps to make sure your don’t accidentally inhale whatever fumes you’re “pumping”.
Granted it’s kind of a silly thing to do and only marginally useful. Each cycle only moves a mouthful of air so I only find it useful for clearing trace amounts of isopropyl fumes from vapes and pipes without hurting my throat, but a fun trick nonetheless if you have the coordination. And depending on the fumes it might still burn your nostrils a bit.
Maybe the better way to explain the technique is: you can close the back of your throat and move your tongue back and forth to push air in and out of your mouth. You can also close your lips and do the same motion with your tongue to push air in and out your nose. All you really need to do is alternate between the two so that instead of pushing the air back out your mouth, you push it out your nose.
Why don’t you just try it…? It’s not that hard to do. Just relax your sinus muscles and close your lips, then alternate between using your tongue to fill the space in your mouth pushing air out your nose and moving your tongue out of the way to create a void, sucking air back in. If you can coordinate this while also alternating between closing your sinuses and opening your lips while you create the void in order to suck air in your lips, and then closing your lips and opening your sinus so that the air gets pushed out your nose, then you’ll be able to pump air from your mouth out your nose without using your lungs.
This would be huge, one of the biggest draws to Plex for me is being able to use a single account to watch content across all my friends servers from any Plex UI (be it the hosted one at app.plex.tv or the copy hosted with each Plex server)